UV12 I/O Expander works together with UV07 Control Handle to create a state-of-the-art control system for the most demanding applications. When either UV07's 10 proportional solenoid outputs are not enough, or it's not applicable to wire the solenoid wires all the way from the hydraulic valve to the UV07 Control Handle in to the cabin, UV12 is the answer. It works as a I/O expansion module controlled via the CAN-bus, simplifying the wire harness greatly. Only CAN-bus cables are necessary to route from the cabin to the hydraulic valve.

UV12 has two AMPSEAL connectors with golden contacts. One is for the power and CAN-bus, when the another is used for the outputs and inputs. This divides the wire harness in two parts, making it easy to plug out the power connector without modifying the valve wire harness, for example in trailers.

The possibilities of creating a top-class control systems are unlimited with UV12. For example a forest crane with a harvester head can be controlled easily by giving the responsibility of driving the harvester head's hydraulic valves to UV12. Only CAN-bus is necessary to route all the way through the crane to the harvester head, reducing the wire count greatly and making maintenance as easy as it should be.

Supply voltage 8 - 30 V DC
Temperature range -30 ... 80 °C
Maximum current per output channel 2200 mA
Outputs 20 solenoid outputs
Output type Proportional, current controlled (closed-loop)
Inputs 2 Analog current inputs (0 ... 20 mA)
Communication protocols CAN-bus, CANopen protocol
IP-rating IP67
Material Anodized aluminum
Datasheet uv12_datasheet.pdf
Physical Dimensions uv12_dimensions.pdf