UV07 Handle

Precise steering

UV07 Control Handle is the heart of UVcan control system. It is not only a joystick. It has all electronics necessary for controlling hydraulic valves built right into it, enclosed with a durable aluminium enclosure. The hydraulic valve’s solenoids can be directly connected to UV07, without a need for a separate controller. Thanks to a powerful processor, all outputs are proportional, current controlled closed-loop outputs. By using current-control, UV07 can compensate the differences of temperature, solenoid resistance, and battery voltage variations, resulting in a precise operations in all situations. UV07 can drive any hydraulic valve which is controlled with a high power current, signal PWM, or even CAN-bus controlled valves, regardless of the valve manufacturer. It can also drive commonly used Danfoss PVEM or PVEU valves.

UV07 Ohjauskahva - Usevolt Oy

Contactless HAL-effect sensors.

Anodized Aluminium Enclosure.

Built in electronics for driving up to 10 solenoids without external controllers.


UV07 is meant for a professional use. The position of the joystick is measured with contactless HAL-effect sensors. They are durable and reliable, and since they don’t have any mechanical contacts, they won’t wear out even under heavy usage.

The electronics are powered by a rock solid, industry standard ARM Cortex-M3 processor, accompanied with 10 proportional solenoid outputs and various input modules, such as analog voltage and current inputs and a temperature sensor input. With these, the UV07 can be used to create any kind of sophisticated vehicle control system with a minimal amount of components.

The UV07 Handle is configured with UV0D touchscreen display. Parameters can be set for up to four operators. Some, but not all, configurable parameters consists of:

Valve solenoid parameters

  • Minimum current in milliamperes
  • Maximum current in milliamperes
  • Acceleration and deceleration in percents
  • Direction invertion

An “operator” is a matter of subject. Even if the vehicle would be used only by a single driver, he/she can create multiple “operators” for storing different parameters for different use cases of the machine. For example, a forestry crane control system might need to have different settings for the crane depending if a harvester head or a log grapple is attached to the crane.

Technical specifications

Height143 mm
Width76 mm
Sensor technologyHAL-effect
Supply voltage8 – 30 V DC
Maximum current per output channel2500 mA
Axis count3
Outputs10 current outputs
Output typeProportional, current controlled (closed-loop) or ratiometric voltage output
Inputs2 Digital voltage inputs, 3 Analog voltage inputs 0-5 V 
Communication protocolsCAN-bus, CANopen protocol
MaterialStainless steel, anodized aluminum and ABS