UV21 Valve controller
Precise Control
UV21 valve controller is our biggest hydraulic valve controller. Durable aluminum enclosure and waterproof connectors ensure reliable operation. UV21 is programmable via UV0D touchscreen as all other our controllers, without computer or external software required.
UV21 has an integrated RGD led that tells the state of the controller always when power is plugged on. It makes easier to detect different fault conditions even when the connection to UV21 controller is lost.
Waterproof connectors with golden contacts
Durable aluminum enclosure
Attachment via 3 M6 allen head screws
UV21
The electronics of UV21 controller are powered by a rock solid, industry standard ARM Cortex-M3 processor, accompanied with up to 18 proportional solenoid outputs and various input modules, such as analog voltage and current inputs and a temperature sensor input. With these, the UV21 can be used to create any kind of sophisticated vehicle control system with a minimal amount of components.
The UV21 valve controller is configured with UV0D touchscreen display. Parameters can be set for up to four operators. Some, but not all, configurable parameters consists of:
Valve solenoid parameters
- Minimum current in milliamperes
- Maximum current in milliamperes
- Acceleration and deceleration in percents
- Direction invertion
Technical Specifications
| Height | 110 mm |
| Width | 120 mm |
| Depth | 35 mm |
| Supply Voltage | 8 – 30 V DC |
| Valve max current | 2300 mA |
| Number of outputs | 16 current outputs |
| Output type | Proportional, current controlled (closed-loop), high-side |
| Inputs | 10 digital inputs 0 – 30 V, 6 analog inputs 0 – 5 V |
| Communications | CAN-bus, CANopen protocol |
| IP-rating | IP67 |
| Material | Anodized aluminum, ABS |